TSC Alpha 40L Mobile Printer delivers efficient mobile printing solutions for logistics, featuring linerless printing and remote management software for real-time performance visibility. As an authorized sales and service center for TSC printers, we offer the best prices, technical support, and BarTender software solutions.
These TSC Alpha 40L Mobile Printer printers come equipped with a full line of mobile printing accessories that save money and time. Options for this series include liner less printing tools, remote printer management software, and much more. The Alpha-40L mobile printers also provide a full line of accessories to assist in performing diverse labeling tasks while on the go, especially in rigorous logistics applications. Unlock the power of greater visibility into real-time data on the health and performance of your Alpha-40L printer with included remote printer management software.
Product Features:
203 dpi (8 dots/mm)
Direct thermal only
Color LCD with buttons
USB
Bluetooth MFi
Wi-Fi with Bluetooth
TSC Console
SOTI Connect (license required)
Mobile
Up to 5 ips (127 mm/s)
(2, 3 ips for peeler mode)
4.09″ (104 mm)
110″ (2,794 mm)
128 MB SDRAM
128 MB
microSD card reader, up to 32GB
2.64″ (67 mm) OD
2″ – 4.4″ (50.8 – 112 mm) with liner
Die cut, black mark, receipt, fan-fold, linerless, continuous (outside wound)
0.5″ (12 mm)
1.0″ if using peeler
Plastic with rubber over-mold construction
TSPL-EZC or ESC-POS
Barcode Labels and ribbons for TSC Alpha 40L Printer
Mindware is Asia’s biggest manufacturer of labels and ribbons. We have been manufacturing labels and ribbons for more than 27 years.
Buying from Mindware
India's biggest barcode and RFID solutions provider — 29 years, 500,000+ customers and 50,000+ printers under maintenance contract. Zebra, TSC, Godex and Citizen each build printers; we are independent of all of them, so we recommend the printer that fits your job, manufacture the labels and ribbons it runs on, and keep it working afterwards.
TSC & Printronix certified service centre in India
TSC Auto ID Technology and Printronix Auto ID Technology have certified Mindware for after service and repair of TSC and Printronix barcode printers — Certificate of Training, issued 2019 and signed by TSC's Director of Application Engineering. The certificate is reproduced below.
TSC factory-trained engineers
Our service engineers have completed factory service training with TSC in Taiwan on two separate occasions, covering the full TSC printer range. Your printer is serviced by people trained by the people who built it.
Our own service centre
We are an independent service centre for TSC and Zebra printers — installation, repair, printhead replacement and calibration handled in-house. You are not routed to a third party when something goes wrong.
50,000+ printers under maintenance
Annual maintenance contracts covering preventive servicing and priority support, so a failed printer does not stop your despatch line.
Labels and ribbons we make ourselves
We manufacture thermal transfer ribbons and label stock, tested on these printers before it ships — wax, wax/resin and resin ribbons, paper, polyester and synthetic labels, matched to your printer and application.
29 years, since 1997
Supplying barcode printing hardware since 1997 to more than 500,000 customers across India. Buying from Mindware means the printer, the consumables and the people who fix it all come from one place.
Certificate of Training
TSC Auto ID Technology Co., Ltd. & Printronix Auto ID Technology Co., Ltd. certify that Mindware has successfully completed the training programme for after service and repair of TSC and Printronix barcode printers. Signed by Phil Liu, Director of Application Engineering, TSC Auto ID Technology Co., Ltd. Date of issue: April 26, 2019.
Service and support: what is free and what is charged
Bought from Mindware — support and service free of cost
Buy the printer here and we take responsibility for keeping it working. Installation, configuration, fault diagnosis and warranty repair are handled by our own engineers at no charge, backed by the principal — the manufacturer. You raise it with us; we deal with the manufacturer.
Bought elsewhere — paid service
We service printers bought from any other source too, as chargeable work through the TSC Printers Paid Service Centre, run by Mindware — diagnosis, repair, printhead replacement and calibration, quoted before we start. An annual maintenance contract usually costs less than call-outs if the machine sits on a production line.
Printer not working? For paid service, send us the problem on WhatsApp.
Send a photo of the print quality or the error on screen, the make and model, and what changed just before it started. That is usually enough for our engineers to tell you whether it is a setting, a consumable or a fault — before anyone books a visit.
What free support depends on.
Free service is provided with the backing of the principal. Where the manufacturer declines a claim — physical or liquid damage, repairs attempted elsewhere, or a printer outside its warranty period — we cannot carry that cost ourselves, and the work becomes chargeable. We will tell you before any work starts and quote it first, so nothing is a surprise.
